Meter-out Circuit | Advantages, Disadvantages and Applications

The circuit diagram of the meter-out circuit is shown in the figure. 
Meter-Out Circuit Diagram
Meter-Out Circuit Diagram
In the meter-out circuit, the flow control valve is connected in the secondary line, directly after the load. The following measure of pressure is taken at various pressure gauges.
Pressure Gauge P1: It indicates the Pmax as set by the pressure relief valve. This pressure is formed on the left side volume of the cylinder, irrespective of the load; hence sealing in this side is always subjected to maximum pressure.
Pressure Gauge P2: It indicates the pressure ON, which is determined by the difference between the pressure Pmax and the load pressure. This difference depends on the ratio of the two-piston areas.
Pressure Gauge P3: Pressure in the return stroke is always equals to 0.
In the meter-out circuit, speed control is achieved by changing the flow adjustment of the flow control valve, which controls the flow coming out from the piston rod end of the cylinder. 
Hence, also it should be noted that in a given circuit, flow control is in the forward direction only i.e. in return stroke the flow of pump to the piston rod end of the cylinder is bypassed through the check valve.
Also, read

Advantages of meter-out circuit

  • The load is always under pressure from both sides, thus it is counterbalanced.
  • Even when the load changes the direction, no uncontrolled jerk motion occurs.

Disadvantages of meter-out circuit

The left side of the cylinder is always under maximum pressure even with a minimum load. Due to continuous pressure from both sides, there is more friction and less seal life.

Applications of meter-out circuit

Meter-out circuits are found to be successful in operations like drilling, boring, reaming, etc. where the drills and mills passing through the workpiece often tend to drag the entire tool unit forward, in such a situation meter-out circuit is the best solution.
Meter-out Circuit | Advantages, Disadvantages and Applications Meter-out Circuit | Advantages, Disadvantages and Applications Reviewed by Admin on 23:16 Rating: 5


haseeb ali said...

Thank you for posting such a great blog. I found your website perfect for my needs. Read About
Satta Matka

web said...

This will open a window containing the HTML source code of the page. Inspect an HTML Element: Right-click on an element basic HTML CODE

junaid said...

Your article has piqued plenty of sure assimilation. i'm able to see why past you've got ended this kind of to your liking activity of creating it attractive. 먹튀검증 안전놀이터 스포츠중계 꽁머니 먹튀검증 토토사이트 안전놀이터 꽁머니

lovejewellery said...

I am constantly looking online for articles that can facilitate me. Thx! Flow Meter Solar

Powered by Blogger.