In the last post, we have seen Automobile Engineering Project Ideas. Now moving further ahead, we are looking for more project ideas that people are demanding. As per the request of many users, we have decided to post on project ideas that are related to Design and Development. So let us talk about some Design and Development project ideas.
Table of Contents
The Study of Flow Condition of Air Jet Weaving Machine
The purpose of this is to model the airflow of the weft insertion of air-jet weaving machines that makes a series of laboratory measurements. Also to create a mathematical function that determines the speed of weft insertion flow without industrial measurement.
Source: Obuda University
Authors : Istvan Patko, Lorant Szabo.
Fabrication of Mini Cooling Tower
In this project, heat is removed from the substance under various controlled conditions. As we all know cooling towers are the most important parts of various chemical plants. The main function of the cooling tower is to reject the heat from it to the atmosphere.
The make-up water is used to replenish the water lost to the evaporation. The hot water from the heat exchangers is sent to the cooling tower. This water exits from the cooling tower and the water are sent back to the heat exchanger and other units for further cooling.
Design of Automatic Operated Packaging Machine
Today’s need of Industry is to increase the production within less time and low cost. Considering this point, we came towards a project on an automated packaging machine that is mostly required in various industries. As it is a series of repeated actions of motions, this system can be automated and applied with high efficiency. Referring to the various research papers and journals, some modifications were done on the old machines that resulted fast in operation. Also, the new machine was more efficient than the previous one.
Design and Construction of Passenger Hovercraft
Basically, hovercraft is a vehicle that travels on the cushion of air trapped under the body to lift. e.g. quad-copter, multi-copter, etc.
Air cushion vehicles can attain higher speeds than ships or land vehicles because they are subjected to lower frictional forces and thus use much less power.
For a hovercraft, there are three main design groups: Thrust, Lift, and Steering System.
Design of a foot for a Humanoid.
The aim of this project is to design a new mechanism of a foot for a humanoid.
This project has been done in the collaboration with research center The Cognition and Interaction Lab (COIN) at the school of humanity and informatics of the University of Skovde. At first, a human foot was studied and an overview was taken about how they work.
A new mechanism was developed using three pneumatic cylinders and was designed in 3D in CAD/CAM software.
Design and Development of Animal Shed Cleaning Machine
The objective of this project is to build up a machine with a simple design and less expense. The machine should be an eco-friendly machine and provide support for villagers to embrace the automated cleaning process.
You can find more about this project in our shared topic, Design, Development, and Fabrication of Animal Shed Cleaning Machine
Design and Development of Solar Thermal Expansion Pump
The fossil fuels reservoirs are getting depleted due to their continuous use of it in automobiles, industries, and other applications. There is a need to use renewable energy sources like solar, air, water, or a combination of these to meet the requirements of transportation, industrial, and all other application.
Existing pumps are either electrical pumps or hand pumps or foot pumps. Electrically operated pumps require electrical energy, hand or foot-operated pump require human efforts.
In the solar thermal expansion pump, we use solar thermal energy for lifting the water. As solar energy is freely available its running cost is very low.
You can find more about this project in Design and Development of Solar Thermal Expansion Pump
Design and Development of Multipurpose Mechanical Machine Project idea
This topic deals with the design, development, and fabrication of multi-purpose mechanical machine which perform three operations at a time namely drilling, shaping, and cutting.
The aim is to design and develop a Multipurpose Mechanical Machine that is designed for the purpose of multiple operations like Drilling, Cutting, Shaping, etc.
The machine should perform multiple operations at the same time with the required speed and it should be automatic.
Design and Development of Plastic Shredder Machine Project Idea
A shredder is a mechanical device used to cut objects into smaller pieces. A plastic shredder machine is a machine that cuts the plastics into smaller pieces in order to make waste management easier.
The available plastic shredding machines are so costly and the setup is high. On the other hand, packing this waste and proving them to these waste processing plants is also costly.
Hence, to overcome this problem we have developed a low-cost Plastic Shredding Machine that will shred the plastic on a small basis and reduce the cost of transportation to processing plants.
Design, Development, and Fabrication of Agricultural Spraying Machine
A sprayer is a device used to spray chemicals or liquids depending upon the application.
Objectives of Agricultural Spraying Machine
- To reduce overall cycle time for the agricultural sprayer.
- To reduce human efforts in order to reduce the fatigue load on farmers.
- Easy to assemble and disassemble.
- Easy to operate by unskilled workers.
- Highly durable.
- It must be affordable.
- Use of multi-nozzles in order to spray large areas at a faster rate.
